CONSTELLATION DRILLING UPDATE
Released
Released
Announcement PDF
7 November 2023
ASX/MEDIA RELEASE
CONSTELLATION UPDATE – LATEST DRILLING PROGRAMME CONFIRMS
EXTENSION OF MINERALISATION
• Current 6 hole drill program completed:
– five of six drill holes intersected copper mineralisation
– successfully intersected sulphides 100m along strike and 200m
down-plunge from the current Mineral Resource Estimate
– Work commencing to convert the mineralisation identified in the
recent drill program into Inferred Mineral Resource category
• Assays now received for final three drill holes - all intercepted copper
sulphide mineralisation, including the following high-grade copper
intercept:
– TAKD099
9.8m @ 2.34% Cu, 0.69g/t Au and 3.1g/t Ag 1
• High-grade copper corridor over 160m confirmed between drill holes
TAKD0941,2 (5.85m @ 2.23% Cu) and TAKD0951,2 (25.95m @ 3.81% Cu) –
see Figure 1 below
• Mineralisation remains open down-plunge and along strike
• Follow-up drill program to commence early calendar 2024:
– test further EM plates at depth; and
– improve Resource confidence in the upper portion of the deposit
• Environmental Impact Statement (EIS) well advanced with no major
issues identified – targeting submission in early calendar 2024
1 Drill hole true width lengths are between 80% to 100% of reported interval lengths.
2 See ASX Announcement “High-grade Copper Intersected at Constellation” dated 20 September 2023
Aeris Resources Limited ABN 30 147 131 977
Level 6, 120 Edward Street, Brisbane, 4000
E: info@aerisresources.com.au T: +61 7 3034 6200 F: +61 7 3034 6290
aerisresources.com.au
ABN 30 147 131 977
ABN 30 147 131 | Page1 977
Established Australian copper-gold producer and explorer, Aeris Resources Limited
(ASX: AIS) (Aeris or the Company) is pleased to provide an update on exploration
activities at the Constellation deposit, located within the Company’s 100% owned
Tritton tenement package in New South Wales.
Aeris’ Executive Chairman, Andre Labuschagne, said “This recently completed drill
program at Constellation has been very successful. We have confirmed that
mineralisation continues 200m down plunge and 100m along strike from the current
Mineral Resource Estimate.”
“Constellation also remains open down-plunge and along strike. A consistent
geological feature of the known deposits on the Tritton tenement package is
significant down-plunge continuity of mineralisation. The Tritton, Budgerygar,
Murrawombie, Avoca Tank, Kurrajong and Constellation deposits all remain open
down plunge, with Tritton mineralisation to date traced over 2kms down-plunge and
remains open.”
"We will kick-off a follow-up drill program at Constellation early in the new year
seeking to test additional EM plates at depth and also improve Resource
confidence in the upper sections of the deposit.”
“Our technical team is well advanced with the EIS and we expect to submit in the
coming March quarter. Constellation is an exciting opportunity with potential to be
a cornerstone source of both sulphide and oxide ore at Tritton.”
Diamond Drill Program – Technical Discussion
Drilling recommenced in Q1 FY24 at the Constellation deposit, following the release
of the Mineral Resource estimate (MRE) in August 2022 3. Drilling has been targeting
mineralisation outside the MRE, with six drill holes now completed.
The six diamond drill hole programme targeted the deeper primary sulphide portion
of the Constellation deposit below the current Mineral Resource Estimate (MRE).
Drilling has been completed to a nominal 80m x 80m drill spacing, deemed sufficient
for conversion to Inferred Mineral Resource Category.
Drilling has intersected reportable mineralised intersections within five of the six
completed drill holes, with TAKD094, TAKD095, and TAKD098 previously reported 4.
Assay results have been received for holes TAKD097, TAKD099 and TAKD100,
reporting high-grade copper intersections including:
• TAKD097 – 4.0m @ 1.10% Cu, 0.52g/t Au, 2.6g/t Ag (from 368.0m) 5
•
TAKD097 – 1.1m @ 2.98% Cu, 1.48g/t Au, 12.5g/t Ag (from 378.6m)5
3 Refer to ASX announcement “Constellation Mineral Resource Update” dated 18th August 2022.
4 See ASX Announcement “High-grade Copper Intersected at Constellation” dated 20 September 2023
5 Drill hole true width lengths are between 80% to 100% of reported interval lengths.
2|P a g e
•
TAKD099 – 9.8m @ 2.34% Cu, 0.69g/t Au, 3.1g/t Ag (from 443.05m) 6
•
TAKD100 – 0.95m @ 2.49% Cu, 1.22g/t Au, 2.0g/t Ag (from 419.2m)6
Drill holes TAKD097 and TAKD100 have targeted the mineralised system 80m along
strike (south) from existing drilling. These intersections are outside the current MRE
and expand the known mineralised envelope, which remains open.
Drill hole TAKD099 targets the mid-point between previously reported drill holes
TAKD094 and TAKD095, demonstrating down-plunge continuity of the mineralisation
across the three holes over 160 meters.
Figure 1 – Long section view looking west showing drill hole pierce points through the Constellation
deposit. Drill holes from the current program are labelled.
6 Drill hole true width lengths are between 80% to 100% of reported interval lengths.
3|P a g e
Moving Forward
Drilling has now been completed to a nominal 80m x 80m drill spacing. Work is
commencing to convert the mineralisation identified in the recent drill program into
Inferred Mineral Resource category.
Drilling activities will recommence in early calendar 2024 targeting further EM plates
at depth as well as improving resource confidence in the upper portion of the
deposit.
The EIS is progressing well and is targeted for submitting in the March quarter of 2024.
This announcement is authorised for lodgement by:
Andre Labuschagne
Executive Chairman
ENDS
For further information, please contact:
Andre Labuschagne
Executive Chairman
Tel: +61 7 3034 6200, or visit our website at www.aerisresources.com.au
or
Stefan Edelman
General Manager – Corporate Development
investorrelations@aerisresources.com.au
About Aeris
Aeris Resources is a mid-tier base and precious metals producer. Its copper
dominant portfolio comprises three operating assets, a mine on care and
maintenance, a long-life development project and a highly prospective exploration
portfolio.
Aeris has a strong pipeline of organic growth projects, an aggressive exploration
program and continues to investigate strategic merger and acquisition
opportunities. The Company’s experienced board and management team bring
significant corporate and technical expertise to a lean operating model. Aeris is
committed to building strong partnerships with its key community, investment and
workforce stakeholders.
4|P a g e
Previous Information
The information in this announcement that relates to previously reported exploration
results for the Constellation deposit is extracted from ASX announcements all of
which are available on the company’s website at www.aerisresources.com.au. The
company confirms that it is not aware of any new information or data that materially
affects the exploration results included in the relevant original market
announcements. The Company confirms that the form and context in which the
Competent Person and Qualified Person’s findings are presented have not been
materially modified from the relevant original market announcements.
Competent Persons Statement – Exploration Results
Mr Chris Raymond confirms that he is the Competent Person for all Exploration Results summarised in this Report
and he has read and understood the requirements of the 2012 Edition of the Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves (JORC Code, 2012 Edition). Mr Raymond is a
Competent Person as defined by the JORC Code, 2012 Edition, having relevant experience to the style of
mineralisation and type of deposit described in the Report and to the activity for which he is accepting
responsibility. Mr Raymond is a Member of the Australian Institute of Geoscience (MAIG No. 6045). Mr Raymond
has reviewed the Report to which this Consent Statement applies and consents to the inclusion in the Report of
the matters based on his information in the form and context in which it appears. Mr Raymond is a full time
employee of Aeris Resources Limited.
APPENDIX A:
Table 1 – Drill hole collar and survey details
Easting1
Northing1
Hole ID
RL (m)
(m)
(m)
TAKD097
498,968
6,560,713
160
TAKD099
499,093
6,560,753
160
TAKD100
499,067
6,560,700
160
Dip
Azimuth2
-68.5⁰
-69.3⁰
-67.9⁰
286.0⁰
287.0⁰
277.4⁰
Total Depth
(m)
429.8
504.4
471.5
Type
Diamond
Diamond
Diamond
1 Easting and northing coordinates are reported in AGD66 Zone 55
2 Azimuth is recorded as a magnetic azimuth reading.
Table 2 – Summary of significant copper intersections from drill hole TAKD095. Assay intervals
have been reported at a 0.5% Cu cut-off grade with a maximum of 3.0m of internal dilution.
Hole ID
Type
TAKD097
TAKD097
TAKD099
TAKD100
TAKD100
DD
DD
DD
DD
DD
From
(m)
368.0
378.6
443.05
410.0
419.2
To (m)
372.0
379.7
452.85
414.8
420.15
Interval
(m)
4.0
1.1
9.8
4.8
0.95
Cu
(%)
1.10
2.98
2.34
0.66
2.49
Au
(g/t)
0.52
1.48
0.69
0.19
1.22
Ag
(g/t)
2.6
12.5
3.1
1.1
2.0
Cu Type
Primary
Primary
Primary
Primary
Primary
*Drill hole true width lengths are between 80% to 100% of reported interval lengths.
5|P a g e
APPENDIX B:
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
Constellation drill program
Criteria
Commentary
Sampling
techniques
1. All samples are collected from diamond drill core.
2. Samples are taken across intervals with visible sulphides. Samples
are collected between 0.25m to 1.4m in length. Sample lengths
take into consideration geology.
Drilling techniques
1. Drilling results reported are via diamond drill core (HQ diameter).
Drill sample
recovery
1. Core recoveries are recorded by the drillers on site at the drill rig.
Core recoveries are checked and verified by an Aeris Resources
field technician and/or geologist.
2. Diamond drill core is pieced together as part of the core
orientation process. During this process depth intervals are
recorded on the core and checked against downhole depths
recorded by drillers on core blocks within the core trays.
3. Historically core recoveries are very high within and outside
zones of mineralisation across each of the known deposits. All
drill holes completed at the Constellation deposit report good
core recoveries through the primary sulphide mineralised
horizon.
Logging
1. All diamond drill core is logged by an Aeris Resources geologist
or a fully trained contract geologist under Aeris supervision.
Diamond core is logged to an appropriate level of detail to
increase the level of geological knowledge and increase the
geological understanding at the Constellation deposit.
2. All diamond core is geologically logged, recording lithology,
presence/concentration of sulphides, alteration, and structure.
3. All geological data recorded during the core logging process is
stored in Aeris Resources’ AcQuire database.
4. All diamond drill core is photographed and digitally stored on
the Company network.
5. Core is stored in core trays and labelled with downhole
meterage intervals and drill hole ID.
Sub-sampling
techniques and
sample preparation
1. All samples are collected in a consistent manner. Samples are
cut via an automatic core saw, and half core samples are
collected between sample lengths from 0.25m and a maximum
length of 1.4 metres.
2. No field duplicates have been collected.
3. The sample size is considered appropriate for the style of
mineralisation and grain size of the material being sampled.
Quality of assay
data and laboratory
tests
1. All samples have been sent to ALS Laboratory Services at their
Orange facility.
2. Samples are analysed by a 3-stage aqua regia digestion with an
ICP-AES finish (suitable for Cu 0.01-50%) – ALS method ME-OG46.
Au analyses are completed on a 50g fire assay fusion with an
AAS finish (suitable for Au grades between 0.001-10ppm) – ALS
method Au-AA22. If a sample records an Au grade above 1ppm
6|P a g e
Criteria
Commentary
a second sample will be re-submitted for another 50g fire assay
charge using ALS method AuAA26 (0.01-100ppm).
3. QA/QC protocols include the use of blanks, duplicates, and
standards (commercial certified reference materials used). The
frequency rate for each QA/QC sample type is 5%.
Verification of
sampling and
assaying
1. Logged drill holes are reviewed by the logging geologist and a
senior geologist. All geological data is logged directly into Aeris
Resources’ logging computers following the standard Aeris
Resources geology codes. Data is transferred to the AcQuire
database and validated on entry.
2. Upon receipt of the assay data no adjustments are made to the
assay values.
Location of data
points
1. Drill hole collar locations are collected on a handheld GPS unit
with an accuracy of approximately +/- 5m.
2. All drill hole locations are collected in Australian Geodetic
Datum 66 zone 55.
3. Quality and accuracy of the drill collars are suitable for
exploration results.
4. Downhole surveys are completed by the drill contractor. All
surveys were reported using a Reflex gyroscopic tool measuring
azimuth and dip orientations every 30m, or shorter intervals if
required.
Data spacing and
distribution
1. Drilling completed at the Constellation deposit is designed on a
nominal 80m x 80m drill pattern.
2. A nominal 80m x 80m drill spacing is considered sufficient to
understand the spatial distribution of copper mineralisation for
eventual conversion to a Mineral Resource.
Orientation of data
in relation to
geological structure
1. All drill holes are designed to intersect the target at, or near right
angles.
2. A majority of drill holes completed have not deviated
significantly from the planned drill hole path.
3. Drill hole intersections through the target zone(s) are not biased.
Sample security
1. Drill holes sampled at the Constellation deposit are not sampled
in their entirety.
2. Sample security protocols follow current procedures which
include: samples are secured within calico bags and
transported to the laboratory in Orange, NSW via a courier
service or with Company personnel.
Audits or reviews
1. Data is validated when uploading into the Company’s AcQuire
database.
2. No formal audit has been conducted.
7|P a g e
Section 2 Reporting of Exploration Results
Constellation drill program
Criteria
Commentary
Mineral
tenement
and land tenure
status
1. The Tritton Regional Tenement package is located
approximately 45km northwest of the township of Nyngan in
central western New South Wales.
2. The Tritton Regional Tenement package consists of 8 Exploration
Licences and 4 Mining Leases. The mineral and mining rights are
owned 100% by the Company’s subsidiary, Tritton Resources Pty
Ltd.
3. The Constellation deposit is located within EL6126, EL8084 and
EL8987. All three exploration licences are in good standing and
no known impediments exist.
Exploration done by
other parties
1. There has not been a significant amount of exploration
completed over and around the Constellation deposit. Burdett
Exploration NL held the ground between May 1971 – May 1972
however conducted no work over the area. Nord Pacific Limited
(Nord) held the ground under EL3930 between 1991 – 2002 and
identified several GeoTEM EM anomalies further north beyond
the Constellation deposit. Nord completed two lines of surface
geochemistry sampling over each GeoTEM EM anomaly. No
further work was completed following the geochemical
sampling program. The Geochem results did not warrant any
further work. No on-ground exploration has been completed
over the area since 2002.
Geology
1. Regionally, mineralisation is hosted within early to midOrdovician turbidite sediments, forming part of the Girilambone
group. Mineralisation is hosted within greenschist facies, ductile
deformed pelitic to psammitic sediments, and sparse zones of
courser sandstones.
2. Sulphide mineralisation within the Tritton tenement package is
dominated by banded to stringer pyrite – chalcopyrite, with a
massive pyrite-chalcopyrite unit along the hanging wall
contact. Alteration assemblages adjacent to mineralisation is
characterised by an ankerite footwall and silica sericite hanging
wall.
Drill hole
information
1. All relevant information pertaining to each drill hole has been
provided.
Data aggregation
methods
1. N/A
Relationship
between
mineralisation
widths and
intercept lengths
1. Drill holes are designed to intersect the target horizon across
strike at or near right angles.
Diagrams
1. Relevant diagrams are included in the body of the report.
Balanced reporting
1. The reporting is considered balanced and all material
8|P a g e
Criteria
Commentary
information associated with the electromagnetic surveys has
been disclosed.
Other substantive
exploration data
1. There is no other relevant substantive exploration data to report.
Further work
1. Drilling has concluded, and is expected to recommence early
in calendar 2024.
9|P a g e
Share your feedback
Discover